Find content
Male
and set Direction to Through All and 
.23. Repeat Step 13 – 22 to back side face and you’re done!
Good luck and have fun!!!
Posts I've Made
In Topic: How to create gears
20 October 2011 - 10:58 AM
22. Click Features>Extruded Cut and set Direction to Through All and .
23. Repeat Step 13 – 22 to back side face and you’re done!
and set Direction to Through All and .23. Repeat Step 13 – 22 to back side face and you’re done!
In Topic: How to create gears
20 October 2011 - 10:57 AM
8. Click Circle 
and sketch a circle center at origin. Click Smart Dimension, 
dimension circle as 0.3in circle.
19. Click Features>Extruded Boss/Base
set D1 to 0.1in and .
20. Click on center face and select Sketch.
21. Click Circle and sketch a circle center at origin. Click Smart Dimension, dimension circle as 0.15in circle.
and sketch a circle center at origin. Click Smart Dimension, dimension circle as 0.3in circle.
19. Click Features>Extruded Boss/Base
set D1 to 0.1in and .
20. Click on center face and select Sketch.
21. Click Circle
and sketch a circle center at origin. Click Smart Dimension, dimension circle as 0.15in circle.
In Topic: How to create gears
20 October 2011 - 10:55 AM
13. Click on Front face and select Normal To.
14. Click on front face and select Sketch.
15. Sketch a Circle and sketch a circle center at origin. Click Smart Dimension, dimension sketch as 0.9in circle.
16. Click Features>Extruded Cut and set D1 to 0.01in and .
17. Click on inner front face and select Sketch.
14. Click on front face and select Sketch.
15. Sketch a Circle
and sketch a circle center at origin. Click Smart Dimension, dimension sketch as 0.9in circle.
16. Click Features>Extruded Cut
and set D1 to 0.01in and .
17. Click on inner front face and select Sketch.
In Topic: How to create gears
20 October 2011 - 10:54 AM
11. Click Feature>Extruded Boss/Base.
Set D1 to 0.1in, click Reverse Direction and.
12. Click on Extrude2 (gear teeth)
and click Circular Pattern. 
Click on the cylinder face as axis of rotation (or click on View>Temporary Axes select the temporary axis as axis of rotation).
Set Instances to 22 and.
Set D1 to 0.1in, click Reverse Direction and
.
12. Click on Extrude2 (gear teeth)
and click Circular Pattern. Click on the cylinder face as axis of rotation (or click on View>Temporary Axes select the temporary axis as axis of rotation).
Set Instances to 22 and
.
In Topic: How to create gears
20 October 2011 - 10:51 AM
5. Click on front face and click Normal To.
and sketch vertical Centerline.
9. Click Smart Dimension, dimension sketch as sketched below.
10. Change view to Isometric.
and sketch vertical Centerline.
8. Click Line 
and sketch gear teeth profile.
9. Click Smart Dimension,
dimension sketch as sketched below.
10. Change view to Isometric.
